Alumission Universal Aluminum Gate (Side Gate/Yard Gate) Los Angeles Style

Alumission Universal Aluminum Gate Kit DIY Powder Coat (Side Gate/Yard Gate). Gate kit only (side panels NOT included). This aluminum gate can fit on any opening of the gate size you choose.

To adjust the width cut the horizontal slats to the right size using any saw with an aluminum blade. Use as much as needed horizontal slats to adjust the height. What comes in the kit. X2 Gate Frame 6' (5?) including top and bottom caps for each post 5? X4 Gate frame cover 6'.

X2 Side post 6' (1.75?) including top and bottom caps for each post 1.875? X1 Gate Stopper 6' x2 Black Stainless Steel Hinges (can be used as regular or self closing), including x20 #10 1.5?

Self-drilling flat head stainless steel screws. Self-drilling flat head stainless steel screws.

X1 Kwikset Daylon Keyed Lever. The number of 5.5" and 1" aluminum slats depend on the size of the gate chosen. The gate comes as parts and should be built to size.

You will have to cut the slats to size that will gives you double the slats. For example: If there are x6 horizontal 5.5"x72" slats, once cut to 3' you will have total of x12 pieces. Than your gate can be. Built to 6' height and 4' wide.

(the side posts and gate's side frame will make the gate fits 4' opening with 3' horizontal slats).

---